BPR1S Plus 2.0 Version

1. Keep pressing the “OK” and “Back” at the same time till the light flashes.

2. Plug in the USB receiver and keep the remote near the USB receiver within 50 cm for faster pairing.

3. The indicator light stops flashing to indicate successful pairing.

1. Press the button that needs to learn for 8 seconds till it’s flashing, then release (The indicator light on after flashing).

2. Align the IR, and press the button that would be learned, it shows success when the indicator light flashes.

3. Repeat 1~2 to learn the other buttons.

4. Press “Delete” and “Back” at the same time till the light flashes to reset IR.

Applicable to Orders Shipped After 2025-08-27
Press “OK” and “Mouse” simultaneously until the light flashes.

For older product versions, you need to download and use the “ble_ota_1.1.5” OTA upgrade tool separately to update the corresponding PC version .bin firmware.

Download and Upgrade Firmware | Review Others Model Instruction

1. The button would be in IR mode when disconnected from Bluetooth.

2. Only the “Power” button has an infrared value when connected to Bluetooth.

3. Press “OK” + “volume +/-” shortly to control the speed of the mouse.

4. In IR mode, it supports full button learning, with no mouse function.

5. In Bluetooth mode, the voice function applies to some ATV devices. However, the voice function may be incompatible with other devices.

6. In Bluetooth mode, the voice function is incompatible with all AOSP Android functions.

7. In 2.4G mode, the voice function supports AOSP Android and ATV devices.

8. In 2.4G mode, some ATV TVs cannot enter when logging into a Google account.

9. Do not use mouse mode in the Google account login interface, otherwise, the “ok” button is incompatible.

10. If there is no infrared learning, all buttons are 2.4G or Bluetooth mode function accordingly.

11. If the buttons have completed IR learning, only the power button will send the IR signal in priority in 2.4G or Bluetooth mode.